ASTM F136 Ti6Al4V(GR5) Eli Titanium(Ti) Round Rod For Sales

Instructions

Titanium rod production status : Hot working condition (R)、Cold working condition (Y)、Annealing state (M)

Titanium rod manufacturing process : Hot forging – hot rolling – finishing (polishing)

Technical requirements

1: the chemical composition of titanium and titanium alloy bar shall comply with the provisions of GB/T 3620.1. When repeated inspection is required, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

2: the diameter or side length of the hot working bar and its allowable deviation should meet the requirements of table 1.

3: the allowable deviation of the diameter of cold-drawn bar after hot processing by turning (grinding) the rod and cold rolling shall conform to the provisions in table 2.

4: the roundness of the rod after hot processing shall not be greater than half of its dimensional tolerance.

5: the length of the working rod shall be 300-6000mm, the length of the annealed rod shall be 300-2000mm, the length of the fixed rod or double rod shall be within the range of the fixed rod length. The allowable deviation of the fixed rod length shall be +20mm.The length of the double ruler shall also be included in the cutting volume of the bar, and each of them shall be 5mm. The length of the fixed ruler or double ruler shall be specified in the contract.