High Quality Cold Rolled ASTM B348 GR5 Titanium Alloy Rods

Titanium rod production brand.

National standard : TA1、TA2、TA3、TA7、TA9、TA10、TC4、TC4ELI、TC6、TC9、TC10、TC11

American standard : GR1、GR2、GR3、GR5、GR7、GR12

Titanium rod implementation standard.

American standard : ASTM B348、ASTM F136、ASTM F67、AMS4928

National standard : GB/T2965-2007、GB/T13810、Q/BS5331-91

Technical requirements

1: the chemical composition of titanium and titanium alloy bar shall comply with the provisions of GB/T 3620.1. When repeated inspection is required, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.

2: the diameter or side length of the hot working bar and its allowable deviation should meet the requirements of table 1.

3: the allowable deviation of the diameter of cold-drawn bar after hot processing by turning (grinding) the rod and cold rolling shall conform to the provisions in table 2.

4: the roundness of the rod after hot processing shall not be greater than half of its dimensional tolerance.

5: the length of the working rod shall be 300-6000mm, the length of the annealed rod shall be 300-2000mm, the length of the fixed rod or double rod shall be within the range of the fixed rod length. The allowable deviation of the fixed rod length shall be +20mm.The length of the double ruler shall also be included in the cutting volume of the bar, and each of them shall be 5mm. The length of the fixed ruler or double ruler shall be specified in the contract.

Description

Description

Titanium Grade 5 is the aerospace grade and is not cold formable, so it is used more often when no forming is needed. Grade 5 alloy will have ultimate tensile strength at and above 895 Mpa. TC4/ Grade 5 titanium alloy has poor stamping property and good thermoplasticity. Welding can be carried out in various forms. The strength of the welded joint can reach 90% of the strength of the base metal. The machinability is good. It needs cemented carbide cutter, large tool size, slow speed and full cooling. Good corrosion resistance and thermal stability. TC4 titanium alloy is one of the most widely used titanium alloys. Parts for long-term work below 400℃.

Diameter: 5~350mm

Length:max 6000mm

Technique: Cold Rolled, hot rolled

Grade: Gr5, Grade 5,TC4

Shape: round rod, square rod, hexagonal rod

Surface: pickling surface, polished surface, sand blasting surface

Certification: ISO,EN10204 3.1,EN10204 3.2

Standard: ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2,

Chemical Composition

    Designation            No. Ti Al V Zr Ni Fe Si C N H O others
Gr2 Reminder / / / / o.15 0.1 0.05 0.03 0.015 0.15 0.3
Gr3 Reminder / / / / 0.3 o.15 0.1 0.05 0.015 0.2 0.3
Gr4 Reminder / / / / 0.4 0.15 0.1 0.05 0.015 0.3 0.3
Gr5 Reminder 5.5~6.75 3.5~4.5 0.8~2.0 0.3 0.15 0.1 0.05 0.015 0.2 0.3
Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit