info@rowlyn.com
Description
Monel K500
Monel K500 Domestic and foreign corresponding grades:
| USA UNS |
|
| Monel K500 | N05500 |
Monel K500 Supply Specifications:
Round bars, rods, strips, tubes, seats, spheres, flanges and forgings negotiated and supplied
Monel K500 Chemical Composition:
| alloy | C | Mn | Si | S | Ni | Cu | Ti | Al | Fe |
| Monel 500 | ≤0.25 | ≤1.50 | ≤0.50 | ≤0.010 | ≥63 | 27.0 ～33.0 |
0.35 ～0.85 |
2.30 ～3.15 |
≤2.0 |
Monel K500 Physical Properties:
| Density | 8.05g/cm3 |
| Melting point | 1288-1343℃ |
Monel K500 the minimum mechanical properties of the alloy at room temperature:
| alloy | Tensile strength Rm N/mm2 |
Yield strength RP0.2N/mm2 |
Extension rate A5 % |
| Monel K500 | 1100 | 790 | 20 |
The Monel K500 has the following characteristics:
Monel K500, also known as Uns N05500, has the same corrosion resistance as the alloy 400, but has higher mechanical strength and hardness.It has good heat-resisting corrosion resistance and long-term microstructure stability.It is mainly used for the manufacture of turbine blades and gas turbine blades with operating temperatures under 750 ℃ in Aero engines;Used for the manufacture of fasteners and springs on ships;Pump and valve parts on chemical equipment;Scraping blades on paper-making equipment.
